Home > Misc, tehsuki import > New case HAF932, OCZ Agility SSD, XFX 9800 GX2 Black Edition

New case HAF932, OCZ Agility SSD, XFX 9800 GX2 Black Edition

I had been wanting to buy a new case for quite a long time, and finally got around to doing it. My old Thermarltake Armor LCS just couldn’t do the job anymore after I switched to air cooling for the cpu. Also took the chance to get my first SSD and a new video card. This isn’t intended as an extended review or anything, just a small post to show pics to friends etc. Let’s begin:

The chosen case was the Cooler Master HAF 932. Its main features are excellent cable management and nice airflow. The case is slightly bigger than the TT, although half as heavy.

The new case:

haf932_ssdoczagility_xfx9800gx2_32 haf932_ssdoczagility_xfx9800gx2_36

They include some wheels (with a brake); I won’t use them though, the case just barely fits under my desk.

Disassembling the old one:

haf932_ssdoczagility_xfx9800gx2_14 haf932_ssdoczagility_xfx9800gx2_20 haf932_ssdoczagility_xfx9800gx2_33

haf932_ssdoczagility_xfx9800gx2_27 haf932_ssdoczagility_xfx9800gx2_26

I became to hate this case for quite a few reasons. One being the location for the hard disks: you can either put them in a removable cage (room for 3) which is placed right IN FRONT of the PSU, which is placed vertically thus.. blocking the PSU fan. Retarded. The other option is to put them in the lanes from pics 1 and 4 above which are attached to the radiator, so you gotta pull it out from the front and it’s a huge pita to do so.

So, let’s continue with the new case:

I always wanted a case with the PSU slot at the bottom, removable hard disk trays and the cable plugs either on the front or the back.

haf932_ssdoczagility_xfx9800gx2_28 haf932_ssdoczagility_xfx9800gx2_29 haf932_ssdoczagility_xfx9800gx2_30 haf932_ssdoczagility_xfx9800gx2_04

I started by installing the motherboard, then doing some cable management, PSU, hard disks, and cards.

haf932_ssdoczagility_xfx9800gx2_01 haf932_ssdoczagility_xfx9800gx2_02 haf932_ssdoczagility_xfx9800gx2_03

haf932_ssdoczagility_xfx9800gx2_11 haf932_ssdoczagility_xfx9800gx2_12

Notice the hole in the 3rd picture. This is apparently so you can change heatsinks that require a backplate without having to remove the entire motherboard etc. Obviously either they didn’t consider AMD sockets, or Gigabyte is at fault with the location (doubt it). Also notice in pic #4 how the fan is placed.. it can be either above or down, not on the sides which would be ideal (possible with the Intel brackets only). Utterly retarded from Thermalright.

haf932_ssdoczagility_xfx9800gx2_21 haf932_ssdoczagility_xfx9800gx2_22

yep, f@cking huge.

haf932_ssdoczagility_xfx9800gx2_23

My razer barracuda ac-1 and terratec ht pci (sound card and tv card). The razer used to be quite expensive.. but I don’t think it’s all that great. My older Terratec Aureon Space 7.1 had much better quality. Too bad they don’t care about customer support/drivers etc (it doesn’t work very well with W7, and I had to bother them for more than a year to get a BETA working driver for Vista, so I won’t even bother for w7; they even removed any contact options from their website). They are n.. german btw. The TV card however works really well in W7 and they keep updating its software.

Now something I dislike about this case:

haf932_ssdoczagility_xfx9800gx2_34 haf932_ssdoczagility_xfx9800gx2_05 haf932_ssdoczagility_xfx9800gx2_09

They include an adapter to install a 3 1/2 unit, but they didn’t include any special cover for it, so there’s a hole on each side. Also, the 5 1/4 bays have a system to very easily remove them by pressing on either side, as you can see on pic 2, however, once you install a drive.. yeah, looks ugly :/ They could have included something to cover that with.

The system to easily install 5 1/4 devices without screws works pretty well compared to most others I’ve seen, just press the button and it’s locked. However.. it’s a bit loose on the right side, so I used a few screws there. They should include those push things on each side imo.

haf932_ssdoczagility_xfx9800gx2_08 haf932_ssdoczagility_xfx9800gx2_10 haf932_ssdoczagility_xfx9800gx2_16

Back to the adapter.. there’s only 1 included, so I couldn’t install my fan controller. I’ll buy some adapters from ebay I guess and update the article later.

The hard disk trays are great (sorta delicate though, probably easy to break). You extract each tray and ~place the disk in, no need for screws. They also include some rubber stuff to minimize vibrations. For the SSD I used a converter I bought sepparetely.

haf932_ssdoczagility_xfx9800gx2_19 haf932_ssdoczagility_xfx9800gx2_15 haf932_ssdoczagility_xfx9800gx2_31

haf932_ssdoczagility_xfx9800gx2_17 haf932_ssdoczagility_xfx9800gx2_18

I used my <3 eee while installing the case so I’d still have internet and such. Susprisingly.. it worked fine plugged to a 24″ LCD @ 1920×1200

haf932_ssdoczagility_xfx9800gx2_13

The brackets to install PCI cards are just awesome. Seriously. I’ve assembled dozens of pcs and encountered a multitude of different “easy-install” systems, they all sucked. This one rocks though, it works really well. Thermaltake’s suck and they always made removing any card a nightmare. These however work as they should.

haf932_ssdoczagility_xfx9800gx2_39

My 8800 GTS (I haven’t received the 9800 gx2 yet). I had never used the stock cooler, purchased the water cooling kit at the same time back then (was quite expensive). (Yes, I won’t be using water cooling on the card anymore, since the entire wc system is part of the TT case). The stock fan works nicely, barely noisy at all. With WC it was always around 55-60C, even under load. With air now.. it ranges 60-75.

haf932_ssdoczagility_xfx9800gx2_25 haf932_ssdoczagility_xfx9800gx2_24 haf932_ssdoczagility_xfx9800gx2_07

And we are done:

haf932_ssdoczagility_xfx9800gx2_35 haf932_ssdoczagility_xfx9800gx2_37 haf932_ssdoczagility_xfx9800gx2_38 haf932_ssdoczagility_xfx9800gx2_06

Now some benchmarks of the SSD:

* Installed w7 in about 7 minutes, from first install click to a booted desktop.

2v27bic 27ydgms 29p42kw esj213

fpcwb4 qxj47t sq4101

Yep, amazing. Look at the I/O in the HD Tune results.

To help its lifetime I followed I few recommendations from the OCZ forums, such as a few registry tweaks, disabling prefetch/superfetch, search indexing, auto-defrag, system restore, pagefile (never used it anyway since I had 8GB), and moving firefox cache, windows logs and temp files to a RAM disk (I have 8GB ram so used 2GB for it). I purchased QSoft’s product for it. It seems to have been made by a single individual, no real business etc, but works extremelly well where other products fail. Even works for 64-bit W7 with no problems. I think it was around ~$12, just the right price.

Cropped Capture - 00065 Cropped Capture - 00066

UPDATE: finally received the 9800 GX2. Also the 5 1/2 tray converters and a pci-e card with 2 sata ports.

So, 2-3 weeks after I first wrote this post (saved it as draft only), received the rest of pieces to complete my new system. Let’s see:

* XFX Geforce 9800 GX2 Black Edition. I bought this used from ebay. I was thinking of a 260 or 275 first, but decided for this. The 8800 GTS was still doing ~fine, however sorta lagging with high quality settings etc in 1920×1200. I will probably ebay it now. So, the new card:

PICT3628 PICT3629 PICT3648

The card is extremely heavy and large. I was worried about the power plugs.. read everywhere the card needs 1×6 and 1×8, no conversion from molex and such. Fortunately my PSU is quite high-end and had no trouble powering it up (Corsair HX620).

Took the chance to test an old xfx 7600 GT that died on me years ago. Thought maybe it was the mobo at the time.. so worth giving it a try; no luck though, it’s dead.

PICT3632

Bay converters: they SUCK. Apparently they aren’t standard size, so I had to cut them a little bit on the sides and keep trying till the devices could be placed. Same thing with the screw holes, they didn’t fit. I will leave the appropriate feedback to the ebay seller. Anyway, I bought 2 of them, used them for the cards reader and the fans controller. They don’t look great, but beats a hole on each side.

PICT3631 PICT3642

One thing that bothers me now.. the card runs extremelly hot. ~75-80C on IDLE, ~100 on load. I’ve read on some forums from other people’s experiences, and this seems to be acceptable Oo The fan is also quite noisy at 100%, so I put it down to 60% manually when I’m not gaming (it auto-adjusts itself, but being the idle temp. so high it’s always loud). I also tried lowering the core/memory/shader frec. but it didn’t help much. I guess I need a more powerful case window fan (it’s very low rpm to keep the noise down, about 650 RPM). Maybe I’ll open the videocard and plug the fan to the controller sometime, so I don’t have to use the nvidia control panel for that every time.

As for gaming.. it’s really nice, played some Aion beta and Oblivion, was great and smooth with max settings.

Cropped Capture - 00067 Cropped Capture - 00068 Cropped Capture - 00069 Cropped Capture - 00073

Now the PCI-e sata card. It was cheap. So cheap they didn’t mention you could only use 2 of the 4 ports at a time. It has 2x e-sata on the back, and 2 internal sata ports. You need to switch some jumpers to use either. I bought this card since my motherboard has only 6 sata ports and I needed at least 8 (5 hard disks, 1 dvd drive, 1 e-sata + 1 sata on the front panel). I don’t think I’ll ever have a use for e-sata, but I often use the other normal sata port.

This was quite a screw up. The card is so small.. the sata cables barely reached, I had to place over the video card :/

PICT3630 PICT3637 PICT3640

It didn’t work right away on W7-64, and the included drivers failed. Trying to update the driver online from device manager failed to find anything. The drivers from the Silicon website failed also (the card is a Sil 3132). Oddly though.. windows update did find the driver, installed it, and then it worked great (beats me why trying from device manager failed).

Light catodes.. w/e they are called: I had 4 of these in my older case, 2 blue, 2 violet, connected to a controller (off/on/alternate blue-violet, on by sound). I decided to use the 2 blue ones, without the controller (it’s small and leaves half a 5 1/4 bay empty). The problem was where I’d place the on/off switch. The case has some sorta opening on top below a plastic pad, which is advertised to be used for filling a water tank for wc (no clue how you’d install that there.. seems like bs advertising). The button was too small, but then I saw this bubble plastic stuff I had lying around and had this idea..

PICT3633 PICT3634 PICT3635

This area is normally covered, so it doesn’t matter if it looks ugly, it’ll be always covered (I can still press the button).

The lights:

PICT3639 PICT3637

And we are mostly finished. The backside with a few more cables:

PICT3636 PICT3643

And we are done. Thanks for reading!

PICT3645 PICT3646

Categories: Misc, tehsuki import Tags:
  1. August 4th, 2009 at 09:15 | #1

    Very time consuming !
    BTW the faster PC of the 2 I’m using at work has an i7 with 12 GB of RAM and 2 Intel SSD in RAID0.. for data streaming.. while the system is on a standard HD 8( ..also an NVidia 280 on it 8)

  1. August 4th, 2009 at 21:48 | #1
  2. March 3rd, 2011 at 11:55 | #2
You must be logged in to post a comment.